japan.recycle.net

Plastic Industry Equipment (Used) Category

Add a Listing       View Listings

Back to Used Equipment

GRADES INCLUDED

  • Plastic Extruders

  • Blow Molding Equipment

  • Film/Sheet Equipment

  • Injection Molding

  • Extruders

  • Granulator/Shredders

  • Hoppers/Loaders

  • Other Used Plastic Industry Equipment


  • ADD A LISTING TO THE EXCHANGE


    Plastic Industry Equipment (Used)

    Select the material / item to buy or sell :


    Choose Wanted OR Available :


    Country:

    Email:




    AVAILABLE : Used Plastic Industry Equipment - LA1217655
    Shipping Pt. / Location: USA, CINCINNATI OHIO
    Pelletizing line for sale. AVAILABLE: One Underwater Pelletizing Line, (800 lbs per hour) Consisting of: (1) PTI 4 1/2” Trident Series Single Screw Extruder, Model: 4500, with newer screw, New 1995 32 to 1 L/D ratio, 5 zone electrically heated, water cooled side vented barrel with closed loop system with pump, tank, and heat exchanger. Water cooled feed throat with hopper, Approximate 45” centerline height. Driven by a 250 hp, 500 volt, 1750/25000 rpm motor thru a Flender gearbox, ratio 13.976 to 1. (1) Control Panel with Wathlow Temperature Controllers. (1) Dynisco HSC-60 Hydraulic Screen Changer with a 1.5 kw power pack. (1) Gamma Meccanica Front Granulator System, Model: TFD/1000/C underwater pelletizer, Serial # 400/1000 D/C New 1997 (1) Vibratory Drainage Transfer Unit. (1) Model 520 LVS1 Spin dryer, Serial # 500/520, New 1997 (1) Blower (1) Pump, Bottom holding Tank, and Control Panel Excellent running condition, Many upgrades made to whole line in 2013 Location: Tennessee
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    99,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Injection Molding Machines - LA1217653
    Shipping Pt. / Location: USA, CINCINNATI OHIO
    300 Ton Husky Injection Molder. One Husky Injection Molder Model: GL300 RS85/70 330 tons New: 1997 Shut Hight: Min: 20.66”, Max: 38.46 Clamp Stroke: 27.56” Max daylight: 49.22” Pot dia: 70 mm Length: 340 mm Cubic ins.;79.85 Shot size: 41.73 oz (1,183.14 grams) GE Fanuc 90-30 controller Hours: 74,340 Includes: Inj. Accumulators nozzle shut off robot interface hydraulic injectors mold cooling can do two stack molds Photos: call for photos and video
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    19,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Injection Molding Machines - LA1217612
    Shipping Pt. / Location: USA, CINCINNATI OHIO
    Netstal 600 ton Injection Molder, New: 2011. AVAILABLE: Netstal 600 Ton Injection Molder (High Speed) Model: Synergy S-6000-3700E Year New: 2011 Min shut height: 33.465” Max shut height: 53.150” Clamp stroke: 37.402” Distance between tie bars: Max daylight: 90.551” Pot diameter: 80 mm Length” 98.16 cubic inches Grams: 1,454.42 Controls: Netstal, screenshot Has core pull Inj. accumulators Robot Interface Currently running with IML robots. Set up to run valve gated or hot tip runners. Can run hydraulic ejectors on either/both platens Is under Power Very Good Condition Location: USA
    Quantity
    Units
    Frequency
    1
    each
    One Time Only
    Price
    Funds
    Per Unit
    195,000.00
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Used Plastic Industry Equipment - LA1216779
    Shipping Pt. / Location: USA, DANVILLE VIRGINIA
    Bunting HS9150 Gravity Feed Flow Through Metal Detector. We have two Bunting Magnetics HS9150 Gravity Fed, Air actuated, 6" diameter flow through Metal Detectors in good working condition. Self monitoring, almost maintenance free, 110/220 volt, sealed enclosure, detects ferrous and NON-ferrous metal contamination in plastic regrind. Unit is in good condition and works great. These units cost $12000 new from Bunting. I can send photos and info. Thanks
    Quantity
    Units
    Frequency
    2
    each
    One Time Only
    Price
    Funds
    Per Unit
    5950
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    AVAILABLE : Granulator/Shredders - LA1216776
    Shipping Pt. / Location: USA, DANVILLE VIRGINIA
    POLYMER MACHINERY SYSTEMS 50 HP HEAVY DUTY 1626 GRANULATORS. We have two identical POLYMER SYSTEMS 50 HP HEAVY DUTY 1626 GRANULATORS available which have been rebuilt in great condition. Designed specifically for continuous high volume recovery of the toughest materials at rates up to 2500 lbs per hour. Polymer Systems’ heavy duty machines are precision machined with heavy steel plates and stress relieved weldments throughout. Massive construction of the cutting chamber, rotor and drive assembly provides maximum rigidity, allowing close knife settings without fear of misalignment or machine damage due to shock loads or continuous operation. Rotor and motor were both rebuilt recently. Rotors and base have been rebuilt and the motor rewound. The complete system is also available and negotiable with sorting table, conveyor, blower, cyclone, stand, rotary gate, and metal detector. Two medium granulators are more efficient than one big one. These grinders are in great shape and ready to process. Contact me for photos and brochures. Thanks
    Quantity
    Units
    Frequency
    2
    each
    One Time Only
    Price
    Funds
    Per Unit
    13750
    USD
    each
    To view contact information or reply to this listing,
    ENTER YOUR EMAIL ADDRESS AND CLICK GO :




    Add a Listing       View Listings

    Back to Used Equipment

    Cooksmill NetSystems
    - File No: